TY  - JOUR
AU  - Tabaković, Marijenka
AU  - Dragičević, Vesna
AU  - Simić, Milena
AU  - Stanisavljević, Rade
AU  - Poštić, Dobrivoj
AU  - Brankov, Milan
AU  - Oro, Violeta
PY  - 2022
UR  - https://plantarum.izbis.bg.ac.rs/handle/123456789/982
AB  - This study aimed to evaluate the influence of environmental conditions and genotype on the yield of three maize lines and the morphological properties of ears and seeds. Three hybrid maize lines were used as material in the study conducted in two consecutive years (2018 and 2019) at one location (Zemun Polje, Belgrade, Serbia). The following parameters were monitored: seed weight (SW), seed volume (V), bulk density (BD), ear length (EL), ear thickness (ET), fraction content and seed yield (MSY). Calibration divided the seed into a small seed fraction of 6.5-8.4 mm (SF) and a large seed fraction of 8.5-11 mm (LF). Seeds smaller than 6.5 mm and larger than 11 mm are presented as seed waste fraction (FW). The average seed yield for all three lines in the first and the second year was 6.13 and 4.66 t ha-1 , respectively. A significant impact of the environment was noticed on seed weights in both years (2018 and 2019), i.e. 327.56 and 251.77 g, respectively. The total variation in yield determined by the morphological characteristics of the seed was R2 =0.514.
PB  - Novi Sad : Nacionalno društvo za procesnu tehniku u poljoprivredi
T2  - Journal on Processing and Energy in Agriculture
T1  - Joint and direct effects of genotypes and environment conditions on yield and yield components variability of maize inbred lines
EP  - 74
IS  - 2
SP  - 71
VL  - 26
DO  - 10.5937/jpea26-36609
ER  - 

@article{
author = "Tabaković, Marijenka and Dragičević, Vesna and Simić, Milena and Stanisavljević, Rade and Poštić, Dobrivoj and Brankov, Milan and Oro, Violeta",
year = "2022",
abstract = "This study aimed to evaluate the influence of environmental conditions and genotype on the yield of three maize lines and the morphological properties of ears and seeds. Three hybrid maize lines were used as material in the study conducted in two consecutive years (2018 and 2019) at one location (Zemun Polje, Belgrade, Serbia). The following parameters were monitored: seed weight (SW), seed volume (V), bulk density (BD), ear length (EL), ear thickness (ET), fraction content and seed yield (MSY). Calibration divided the seed into a small seed fraction of 6.5-8.4 mm (SF) and a large seed fraction of 8.5-11 mm (LF). Seeds smaller than 6.5 mm and larger than 11 mm are presented as seed waste fraction (FW). The average seed yield for all three lines in the first and the second year was 6.13 and 4.66 t ha-1 , respectively. A significant impact of the environment was noticed on seed weights in both years (2018 and 2019), i.e. 327.56 and 251.77 g, respectively. The total variation in yield determined by the morphological characteristics of the seed was R2 =0.514.",
publisher = "Novi Sad : Nacionalno društvo za procesnu tehniku u poljoprivredi",
journal = "Journal on Processing and Energy in Agriculture",
title = "Joint and direct effects of genotypes and environment conditions on yield and yield components variability of maize inbred lines",
pages = "74-71",
number = "2",
volume = "26",
doi = "10.5937/jpea26-36609"
}

Tabaković, M., Dragičević, V., Simić, M., Stanisavljević, R., Poštić, D., Brankov, M.,& Oro, V.. (2022). Joint and direct effects of genotypes and environment conditions on yield and yield components variability of maize inbred lines. in Journal on Processing and Energy in Agriculture
Novi Sad : Nacionalno društvo za procesnu tehniku u poljoprivredi., 26(2), 71-74.
https://doi.org/10.5937/jpea26-36609

Tabaković M, Dragičević V, Simić M, Stanisavljević R, Poštić D, Brankov M, Oro V. Joint and direct effects of genotypes and environment conditions on yield and yield components variability of maize inbred lines. in Journal on Processing and Energy in Agriculture. 2022;26(2):71-74.
doi:10.5937/jpea26-36609 .

Tabaković, Marijenka, Dragičević, Vesna, Simić, Milena, Stanisavljević, Rade, Poštić, Dobrivoj, Brankov, Milan, Oro, Violeta, "Joint and direct effects of genotypes and environment conditions on yield and yield components variability of maize inbred lines" in Journal on Processing and Energy in Agriculture, 26, no. 2 (2022):71-74,
https://doi.org/10.5937/jpea26-36609 . .

TY  - JOUR
AU  - Tabaković, Marijenka
AU  - Dragičević, Vesna
AU  - Simic, Milena
AU  - Brankov, Milan
AU  - Štrbanović, Ratibor
AU  - Knežević, Jasmina
AU  - Oro, Violeta
PY  - 2022
UR  - https://plantarum.izbis.bg.ac.rs/handle/123456789/842
AB  - This   study   aimed   to   determine   the   influence   of   sowing   dates   on morphological properties and grain yield. The experiment was conducted during 2018 (Y1) and 2019 (Y2) at one location in Serbia (Zemun Polje). Three inbred lines,  produced  at  the  Maize  ResearchInstitute  (Serbia),  were  used  as  the material.  Sowing  was  set  in  two  terms,  earlier  1  April    (SD1)  and  optimal  20 April  (SD2).  Morphological  properties  of  the  cob  were  measured  in  the laboratory conditions: the ear weight (EW), the cob weight (CW), the cob length (CL), the cob thickness (CT), the 1000 kernel weight (SW), and the grain yield (GY). The sowing date significantly affected the morphological properties of the cob (p≤0,05). The interaction of factors also had a significant impact on the variability  of  traits.  Three-way analysis  of  variance  indicates  that SD1Y1 treatment in combination with ZP1 and ZP3 inbred lines has a higher yield (6.28 t  ha-1,  7.05  t  ha-1).  Further,  the  1000-kernel  weight  in  all  three  genotypes  was higher  in  the  SD1,  ZP1  (324.35  g),  ZP2  (329.78  g),  and  ZP3  (326.55  g).  The earlier  sowing  date  was  also  favourable  for  the  cob  weight.Meteorological conditions  can  be  more  or  less  stressful  for  field  crops.  Adverse  weather conditions can be avoided or reduced by applying different sowing dates.
PB  - University of Banja Luka Faculty of Agriculture
T2  - Агрознање/Agroknowledge Journal
T1  - Importance of sowing date optimization for morphological properties and grain yield of maize inbred lines
EP  - 131
IS  - 3
SP  - 121
VL  - 23
DO  - 10.7251/AGREN2203121T
ER  - 

@article{
author = "Tabaković, Marijenka and Dragičević, Vesna and Simic, Milena and Brankov, Milan and Štrbanović, Ratibor and Knežević, Jasmina and Oro, Violeta",
year = "2022",
abstract = "This   study   aimed   to   determine   the   influence   of   sowing   dates   on morphological properties and grain yield. The experiment was conducted during 2018 (Y1) and 2019 (Y2) at one location in Serbia (Zemun Polje). Three inbred lines,  produced  at  the  Maize  ResearchInstitute  (Serbia),  were  used  as  the material.  Sowing  was  set  in  two  terms,  earlier  1  April    (SD1)  and  optimal  20 April  (SD2).  Morphological  properties  of  the  cob  were  measured  in  the laboratory conditions: the ear weight (EW), the cob weight (CW), the cob length (CL), the cob thickness (CT), the 1000 kernel weight (SW), and the grain yield (GY). The sowing date significantly affected the morphological properties of the cob (p≤0,05). The interaction of factors also had a significant impact on the variability  of  traits.  Three-way analysis  of  variance  indicates  that SD1Y1 treatment in combination with ZP1 and ZP3 inbred lines has a higher yield (6.28 t  ha-1,  7.05  t  ha-1).  Further,  the  1000-kernel  weight  in  all  three  genotypes  was higher  in  the  SD1,  ZP1  (324.35  g),  ZP2  (329.78  g),  and  ZP3  (326.55  g).  The earlier  sowing  date  was  also  favourable  for  the  cob  weight.Meteorological conditions  can  be  more  or  less  stressful  for  field  crops.  Adverse  weather conditions can be avoided or reduced by applying different sowing dates.",
publisher = "University of Banja Luka Faculty of Agriculture",
journal = "Агрознање/Agroknowledge Journal",
title = "Importance of sowing date optimization for morphological properties and grain yield of maize inbred lines",
pages = "131-121",
number = "3",
volume = "23",
doi = "10.7251/AGREN2203121T"
}

Tabaković, M., Dragičević, V., Simic, M., Brankov, M., Štrbanović, R., Knežević, J.,& Oro, V.. (2022). Importance of sowing date optimization for morphological properties and grain yield of maize inbred lines. in Агрознање/Agroknowledge Journal
University of Banja Luka Faculty of Agriculture., 23(3), 121-131.
https://doi.org/10.7251/AGREN2203121T

Tabaković M, Dragičević V, Simic M, Brankov M, Štrbanović R, Knežević J, Oro V. Importance of sowing date optimization for morphological properties and grain yield of maize inbred lines. in Агрознање/Agroknowledge Journal. 2022;23(3):121-131.
doi:10.7251/AGREN2203121T .

Tabaković, Marijenka, Dragičević, Vesna, Simic, Milena, Brankov, Milan, Štrbanović, Ratibor, Knežević, Jasmina, Oro, Violeta, "Importance of sowing date optimization for morphological properties and grain yield of maize inbred lines" in Агрознање/Agroknowledge Journal, 23, no. 3 (2022):121-131,
https://doi.org/10.7251/AGREN2203121T . .