TY  - JOUR
AU  - Vuković, Aleksandar
AU  - Milenković, Bojana
AU  - Lalević, Dragana
AU  - Barać, Saša
AU  - Biberdžić, Milan
AU  - Đokić, Dragoslav
AU  - Stanisavljević, Rade
PY  - 2024
UR  - https://enauka.gov.rs/handle/123456789/867252
UR  - https://plantarum.izbis.bg.ac.rs/handle/123456789/1234
AB  - The study presents the effect of cutting height (10, 15 and 30 cm) on yield, nutritional value and chemical
composition of silage corn. The experiment was carried out under dryland conditions and the silage corn was
harvested with three types of self-propelled silage harvesters. Cutting height increased linearly with increasing
operating speed of silage harvesters. For all types of silage harvesters, the cutting height of 30 cm had a
statistically significant (p≤0.05) effect on losses of yields. The numerical value of the R2
factor (from R2
= 0.8978
to 0.9896) shows a strong dependence in all harvesters for all three cutting heights. The regression coefficients
(b) show a significant deviation from the theoretical cutting height at 10 and 15 cm (b = 0.6676 and b = 0.6715),
and very significant (b = 2.0249) at the theoretical cutting height of 30 cm. With an increase in cutting height,
the nutritional value of silage increased. At a cutting height of 30 cm, during the test period in all types of
harvesters, the crude protein (CP) content was significantly (p≤0.05) higher than at a cutting height of 10 cm
(harvester C = 6.94% at 10 cm, harvester B = 8.15% at 30 cm). The cutting height of 30 cm influenced a
significantly (p≤0.05) lower crude fiber (CF) content of harvester Claas Jaguar 850 (21.19%), compared to
John Deere 6810 (24.33%) at a height of 10 cm. The crude ash content (CAsh) did not vary significantly under
the influence of cutting height. Starch content was statistically higher (p≤0.05) in all types of silage harvesters
during the test at a cutting height of 30 cm (28.2% harvester New Holland FX 28, 33.8% harvester
Claas Jaguar 850). The content of calcium (Ca) was significantly higher at a height of 30 cm for harvesters
John Deere 6810 and Claas Jaguar 850 in the third year, while no significant difference was found for
harvester New Holland FX 28. For phosphorus (P), there was no significant difference depending on the
cutting height, but it did exist depending on the year.
PB  - INCDA Fundulea
T2  - Romanian Agricultural Research
T1  - Nutritional Value and Chemical Composition of Corn Silage Depending on Cutting Height and Forage Losses
EP  - 66
SP  - 55
VL  - 41
DO  - 10.59665/rar4106
ER  - 

@article{
author = "Vuković, Aleksandar and Milenković, Bojana and Lalević, Dragana and Barać, Saša and Biberdžić, Milan and Đokić, Dragoslav and Stanisavljević, Rade",
year = "2024",
abstract = "The study presents the effect of cutting height (10, 15 and 30 cm) on yield, nutritional value and chemical
composition of silage corn. The experiment was carried out under dryland conditions and the silage corn was
harvested with three types of self-propelled silage harvesters. Cutting height increased linearly with increasing
operating speed of silage harvesters. For all types of silage harvesters, the cutting height of 30 cm had a
statistically significant (p≤0.05) effect on losses of yields. The numerical value of the R2
factor (from R2
= 0.8978
to 0.9896) shows a strong dependence in all harvesters for all three cutting heights. The regression coefficients
(b) show a significant deviation from the theoretical cutting height at 10 and 15 cm (b = 0.6676 and b = 0.6715),
and very significant (b = 2.0249) at the theoretical cutting height of 30 cm. With an increase in cutting height,
the nutritional value of silage increased. At a cutting height of 30 cm, during the test period in all types of
harvesters, the crude protein (CP) content was significantly (p≤0.05) higher than at a cutting height of 10 cm
(harvester C = 6.94% at 10 cm, harvester B = 8.15% at 30 cm). The cutting height of 30 cm influenced a
significantly (p≤0.05) lower crude fiber (CF) content of harvester Claas Jaguar 850 (21.19%), compared to
John Deere 6810 (24.33%) at a height of 10 cm. The crude ash content (CAsh) did not vary significantly under
the influence of cutting height. Starch content was statistically higher (p≤0.05) in all types of silage harvesters
during the test at a cutting height of 30 cm (28.2% harvester New Holland FX 28, 33.8% harvester
Claas Jaguar 850). The content of calcium (Ca) was significantly higher at a height of 30 cm for harvesters
John Deere 6810 and Claas Jaguar 850 in the third year, while no significant difference was found for
harvester New Holland FX 28. For phosphorus (P), there was no significant difference depending on the
cutting height, but it did exist depending on the year.",
publisher = "INCDA Fundulea",
journal = "Romanian Agricultural Research",
title = "Nutritional Value and Chemical Composition of Corn Silage Depending on Cutting Height and Forage Losses",
pages = "66-55",
volume = "41",
doi = "10.59665/rar4106"
}

Vuković, A., Milenković, B., Lalević, D., Barać, S., Biberdžić, M., Đokić, D.,& Stanisavljević, R.. (2024). Nutritional Value and Chemical Composition of Corn Silage Depending on Cutting Height and Forage Losses. in Romanian Agricultural Research
INCDA Fundulea., 41, 55-66.
https://doi.org/10.59665/rar4106

Vuković A, Milenković B, Lalević D, Barać S, Biberdžić M, Đokić D, Stanisavljević R. Nutritional Value and Chemical Composition of Corn Silage Depending on Cutting Height and Forage Losses. in Romanian Agricultural Research. 2024;41:55-66.
doi:10.59665/rar4106 .

Vuković, Aleksandar, Milenković, Bojana, Lalević, Dragana, Barać, Saša, Biberdžić, Milan, Đokić, Dragoslav, Stanisavljević, Rade, "Nutritional Value and Chemical Composition of Corn Silage Depending on Cutting Height and Forage Losses" in Romanian Agricultural Research, 41 (2024):55-66,
https://doi.org/10.59665/rar4106 . .

TY  - JOUR
AU  - Đokić, Dragoslav
AU  - Terzić, Dragan
AU  - Knežević, Jasmina
AU  - Vuković, Aleksandar
AU  - Poštić, Dobrivoj
AU  - Štrbanović, Ratibor
AU  - Stanisavljević, Rade
PY  - 2023
UR  - https://plantarum.izbis.bg.ac.rs/handle/123456789/1147
AB  - The paper presents the results of three - year tests (I, II, III) of finishing alfalfa seed of three different purities. Natural alfalfa seeds were classified into three groups: 1) without the presence of quarantine weeds; 2) with the presence of quarantine weeds of Cuscuta spp. and Rumex spp., but in smaller quantities; 3) in which there were also quarantine weeds in larger quantities. The alfalfa seeds were cleaned on a selector with sieves and on a magnetic separator manufactured by Emceka-Gompper. Depending on the purity of natural alfalfa seed, the finishing process had to take place in one to three passes through a system of machines, which caused different finishing output and losses of finishing processed alfalfa seed (9.2 to 38.0%). After finishing, the highest quality of processed seeds was from the group with the highest quarantine weeds (group 3), which was reflected in the lowest percentage of hard seeds (16%) and the highest percentage of germination (83%) in all years. This is also shown by a highly significant negative correlation between germination and hard seed (r=-430) after three years of seed processing.
PB  - NARDI FUNDULEA, ROMANIA
T2  - Romanian Agricultural Research
T1  - Influence of the Presence of Weeds and Other Impurities in Natural Alfalfa Seed on Finishing Machines Work and Seed Quality During Three Years
EP  - 272
SP  - 261
VL  - 40
DO  - 10.59665/rar4025
ER  - 

@article{
author = "Đokić, Dragoslav and Terzić, Dragan and Knežević, Jasmina and Vuković, Aleksandar and Poštić, Dobrivoj and Štrbanović, Ratibor and Stanisavljević, Rade",
year = "2023",
abstract = "The paper presents the results of three - year tests (I, II, III) of finishing alfalfa seed of three different purities. Natural alfalfa seeds were classified into three groups: 1) without the presence of quarantine weeds; 2) with the presence of quarantine weeds of Cuscuta spp. and Rumex spp., but in smaller quantities; 3) in which there were also quarantine weeds in larger quantities. The alfalfa seeds were cleaned on a selector with sieves and on a magnetic separator manufactured by Emceka-Gompper. Depending on the purity of natural alfalfa seed, the finishing process had to take place in one to three passes through a system of machines, which caused different finishing output and losses of finishing processed alfalfa seed (9.2 to 38.0%). After finishing, the highest quality of processed seeds was from the group with the highest quarantine weeds (group 3), which was reflected in the lowest percentage of hard seeds (16%) and the highest percentage of germination (83%) in all years. This is also shown by a highly significant negative correlation between germination and hard seed (r=-430) after three years of seed processing.",
publisher = "NARDI FUNDULEA, ROMANIA",
journal = "Romanian Agricultural Research",
title = "Influence of the Presence of Weeds and Other Impurities in Natural Alfalfa Seed on Finishing Machines Work and Seed Quality During Three Years",
pages = "272-261",
volume = "40",
doi = "10.59665/rar4025"
}

Đokić, D., Terzić, D., Knežević, J., Vuković, A., Poštić, D., Štrbanović, R.,& Stanisavljević, R.. (2023). Influence of the Presence of Weeds and Other Impurities in Natural Alfalfa Seed on Finishing Machines Work and Seed Quality During Three Years. in Romanian Agricultural Research
NARDI FUNDULEA, ROMANIA., 40, 261-272.
https://doi.org/10.59665/rar4025

Đokić D, Terzić D, Knežević J, Vuković A, Poštić D, Štrbanović R, Stanisavljević R. Influence of the Presence of Weeds and Other Impurities in Natural Alfalfa Seed on Finishing Machines Work and Seed Quality During Three Years. in Romanian Agricultural Research. 2023;40:261-272.
doi:10.59665/rar4025 .

Đokić, Dragoslav, Terzić, Dragan, Knežević, Jasmina, Vuković, Aleksandar, Poštić, Dobrivoj, Štrbanović, Ratibor, Stanisavljević, Rade, "Influence of the Presence of Weeds and Other Impurities in Natural Alfalfa Seed on Finishing Machines Work and Seed Quality During Three Years" in Romanian Agricultural Research, 40 (2023):261-272,
https://doi.org/10.59665/rar4025 . .

TY  - JOUR
AU  - Stanisavljević, Rade
AU  - Vuković, Aleksandar
AU  - Petrović, Dragan V.
AU  - Radojević, Rade L.
AU  - Barać, Saša
AU  - Mileusnić, Zoran
AU  - Tadić, Vjekoslav
PY  - 2021
UR  - https://plantarum.izbis.bg.ac.rs/handle/123456789/613
AB  - This paper presents the tests results of three types of hay mowing machines (later in text: mowers), namely a self-propelled oscillatory mower-conditioner and two tractor-mounted mowers with oscillatory and rotary blades, used to mow alfalfa grown under dry land conditions in the region of central Serbia during three seasons in 2014, 2015 and 2016. Although characterized by older design, they are still commonly used at smaller and medium size farms in this region. Therefore, their optimal exploitation parameters are still of large importance for hay quality and production efficiency and sustainability. The exploitation parameters of all three mowers generally increased linearly with higher speeds, having high R2 values (over 0,8), with rare exceptions. The regression coefficients b clearly showed that the self-propelled mower-conditioner achieved maximum increase in production performance (b = 0,3606), compared with the oscillatory (b = 0,1158) and rotary mowers (b = 0,1414). Mower design had a significant (p ≤ 0,001) effect on cutting and chopping losses, production performance, and specific fuel consumption (p ≤ 0,05). The tests confirmed the superiority of the self-propelled mower over the two mowers aggregated with tractors.
PB  - Strojarski fakultet
T2  - Tehnicki vjesnik
T1  - Efficiency of alfalfa hay mowing machines under the dryland conditions
EP  - 1510
IS  - 5
SP  - 1503
VL  - 28
DO  - 10.17559/TV-20200720092823
ER  - 

@article{
author = "Stanisavljević, Rade and Vuković, Aleksandar and Petrović, Dragan V. and Radojević, Rade L. and Barać, Saša and Mileusnić, Zoran and Tadić, Vjekoslav",
year = "2021",
abstract = "This paper presents the tests results of three types of hay mowing machines (later in text: mowers), namely a self-propelled oscillatory mower-conditioner and two tractor-mounted mowers with oscillatory and rotary blades, used to mow alfalfa grown under dry land conditions in the region of central Serbia during three seasons in 2014, 2015 and 2016. Although characterized by older design, they are still commonly used at smaller and medium size farms in this region. Therefore, their optimal exploitation parameters are still of large importance for hay quality and production efficiency and sustainability. The exploitation parameters of all three mowers generally increased linearly with higher speeds, having high R2 values (over 0,8), with rare exceptions. The regression coefficients b clearly showed that the self-propelled mower-conditioner achieved maximum increase in production performance (b = 0,3606), compared with the oscillatory (b = 0,1158) and rotary mowers (b = 0,1414). Mower design had a significant (p ≤ 0,001) effect on cutting and chopping losses, production performance, and specific fuel consumption (p ≤ 0,05). The tests confirmed the superiority of the self-propelled mower over the two mowers aggregated with tractors.",
publisher = "Strojarski fakultet",
journal = "Tehnicki vjesnik",
title = "Efficiency of alfalfa hay mowing machines under the dryland conditions",
pages = "1510-1503",
number = "5",
volume = "28",
doi = "10.17559/TV-20200720092823"
}

Stanisavljević, R., Vuković, A., Petrović, D. V., Radojević, R. L., Barać, S., Mileusnić, Z.,& Tadić, V.. (2021). Efficiency of alfalfa hay mowing machines under the dryland conditions. in Tehnicki vjesnik
Strojarski fakultet., 28(5), 1503-1510.
https://doi.org/10.17559/TV-20200720092823

Stanisavljević R, Vuković A, Petrović DV, Radojević RL, Barać S, Mileusnić Z, Tadić V. Efficiency of alfalfa hay mowing machines under the dryland conditions. in Tehnicki vjesnik. 2021;28(5):1503-1510.
doi:10.17559/TV-20200720092823 .

Stanisavljević, Rade, Vuković, Aleksandar, Petrović, Dragan V., Radojević, Rade L., Barać, Saša, Mileusnić, Zoran, Tadić, Vjekoslav, "Efficiency of alfalfa hay mowing machines under the dryland conditions" in Tehnicki vjesnik, 28, no. 5 (2021):1503-1510,
https://doi.org/10.17559/TV-20200720092823 . .

TY  - JOUR
AU  - Đokić, Dragoslav
AU  - Stanisavljević, Rade
AU  - Milenković, Jasmina
AU  - Koprivica, Ranko
AU  - Knežević, Jasmina
AU  - Vuković, Aleksandar
AU  - Terzic, Dragan
PY  - 2020
UR  - https://plantarum.izbis.bg.ac.rs/handle/123456789/826
AB  - This paper presents the results of the cleaning tests of three different natural alfalfa seed lots and three different red clover seed lots performed using seed processing machines. The alfalfa (Medicago sativa L.) and the red clover (Trifolium pratense L.) are two of the most important perennial forage legumes in the Republic of Serbia. Alfalfa and red clover seeds for sowing should be clean, i.e. free from weeds and foreign matter, and of high germination and genetic values. Such requirements can only be achieved by cleaning, i.e. removing all undesirable impurities and poor-quality seeds. The following parameters important for the seed cleaning process and equipment were observed: seed purity, contents of weed and other crop seeds, inert substance content, amounts of processed seeds (kg), seed loss and processing output. The results obtained facilitate (depending on the amount and type of weeds and other impurities found in the alfalfa and red clover seed lots considered) the proper adjustment of the seed processing equipment to obtain the largest possible quantity of quality seeds that are in compliance with the laws and regulations of Serbia.
PB  - Nacionalno društvo za procesnu tehniku i energetiku u poljoprivredi
T2  - Journal on Processing and Energy in Agriculture
T1  - Effectiveness of the process of cleaning natural alfalfa (Medicago sativa L.) and red clover (Trifolium pratense L.) seeds
EP  - 12
IS  - 1
SP  - 9
VL  - 24
DO  - 10.5937/jpea24-25504
ER  - 

@article{
author = "Đokić, Dragoslav and Stanisavljević, Rade and Milenković, Jasmina and Koprivica, Ranko and Knežević, Jasmina and Vuković, Aleksandar and Terzic, Dragan",
year = "2020",
abstract = "This paper presents the results of the cleaning tests of three different natural alfalfa seed lots and three different red clover seed lots performed using seed processing machines. The alfalfa (Medicago sativa L.) and the red clover (Trifolium pratense L.) are two of the most important perennial forage legumes in the Republic of Serbia. Alfalfa and red clover seeds for sowing should be clean, i.e. free from weeds and foreign matter, and of high germination and genetic values. Such requirements can only be achieved by cleaning, i.e. removing all undesirable impurities and poor-quality seeds. The following parameters important for the seed cleaning process and equipment were observed: seed purity, contents of weed and other crop seeds, inert substance content, amounts of processed seeds (kg), seed loss and processing output. The results obtained facilitate (depending on the amount and type of weeds and other impurities found in the alfalfa and red clover seed lots considered) the proper adjustment of the seed processing equipment to obtain the largest possible quantity of quality seeds that are in compliance with the laws and regulations of Serbia.",
publisher = "Nacionalno društvo za procesnu tehniku i energetiku u poljoprivredi",
journal = "Journal on Processing and Energy in Agriculture",
title = "Effectiveness of the process of cleaning natural alfalfa (Medicago sativa L.) and red clover (Trifolium pratense L.) seeds",
pages = "12-9",
number = "1",
volume = "24",
doi = "10.5937/jpea24-25504"
}

Đokić, D., Stanisavljević, R., Milenković, J., Koprivica, R., Knežević, J., Vuković, A.,& Terzic, D.. (2020). Effectiveness of the process of cleaning natural alfalfa (Medicago sativa L.) and red clover (Trifolium pratense L.) seeds. in Journal on Processing and Energy in Agriculture
Nacionalno društvo za procesnu tehniku i energetiku u poljoprivredi., 24(1), 9-12.
https://doi.org/10.5937/jpea24-25504

Đokić D, Stanisavljević R, Milenković J, Koprivica R, Knežević J, Vuković A, Terzic D. Effectiveness of the process of cleaning natural alfalfa (Medicago sativa L.) and red clover (Trifolium pratense L.) seeds. in Journal on Processing and Energy in Agriculture. 2020;24(1):9-12.
doi:10.5937/jpea24-25504 .

Đokić, Dragoslav, Stanisavljević, Rade, Milenković, Jasmina, Koprivica, Ranko, Knežević, Jasmina, Vuković, Aleksandar, Terzic, Dragan, "Effectiveness of the process of cleaning natural alfalfa (Medicago sativa L.) and red clover (Trifolium pratense L.) seeds" in Journal on Processing and Energy in Agriculture, 24, no. 1 (2020):9-12,
https://doi.org/10.5937/jpea24-25504 . .

TY  - JOUR
AU  - Đokić, Dragoslav
AU  - Stanisavljević, Rade
AU  - Terzić, Dragan
AU  - Milenković, Jasmina
AU  - Kozlov, Vjačeslav
AU  - Koprivica, Ranko
AU  - Vuković, Aleksandar
PY  - 2019
UR  - https://plantarum.izbis.bg.ac.rs/handle/123456789/1005
AB  - početnih čistoća, na mašinama za doradu. U Republici Srbiji gaji se veći broj višegodišnjih leguminoza zbog njihovog izuzetnog značaja u proizvodnji stočne hrane. Najznačajnije višegodišnje krmne leguminoze u Srbiji po površinama na kojima se gaje, kao i po kvalitetu hraniva u ishrani domaćih životinja su lucerka i crvena detelina. Seme koje se koristi za setvu za njihovu proizvodnju mora da bude čisto, visoke klijavosti i genetske vrednosti. Svi ovi zahtevi ostvaruje se doradom, odnosno odstranjivanjem svih nečistoća i semena lošijeg kvaliteta. Cilj ispitivanja bio je da se pri doradi semena ove dve višegodišnje leguminoze prikažu koji su parametri efikasnosti mašina za doradu. Prikazani su svi relevantni parametri koji definišu karakteristike mašina za doradu semena, a to su: čisto seme (%), seme korova i seme drugih kultura (%), inertne materije (%), količina dorađenog semena (kg), gubici semena (%) i randman dorade (%).Dobijeni rezultati omogućavaju izbor odgovarajućih mašina i njihovo pravilno podešavanje pri doradi semena, u zavisnosti od količine i vrste korova i ostalih primesa koje se nalaze u naturalnom semenu.
PB  - Univerzitet u Beogradu Poljoprivredni fakultet Institut za poljoprivrednu tehniku
T2  - Poljoprivredna tehnika
T1  - 2019 Parameteres of efficiency of machines for seed processing of red clover and alfalfa
EP  - 18
IS  - 1
SP  - 10
VL  - 44
DO  - 10.5937/poljteh1901010d
DO  - 0554-5587
ER  - 

@article{
author = "Đokić, Dragoslav and Stanisavljević, Rade and Terzić, Dragan and Milenković, Jasmina and Kozlov, Vjačeslav and Koprivica, Ranko and Vuković, Aleksandar",
year = "2019",
abstract = "početnih čistoća, na mašinama za doradu. U Republici Srbiji gaji se veći broj višegodišnjih leguminoza zbog njihovog izuzetnog značaja u proizvodnji stočne hrane. Najznačajnije višegodišnje krmne leguminoze u Srbiji po površinama na kojima se gaje, kao i po kvalitetu hraniva u ishrani domaćih životinja su lucerka i crvena detelina. Seme koje se koristi za setvu za njihovu proizvodnju mora da bude čisto, visoke klijavosti i genetske vrednosti. Svi ovi zahtevi ostvaruje se doradom, odnosno odstranjivanjem svih nečistoća i semena lošijeg kvaliteta. Cilj ispitivanja bio je da se pri doradi semena ove dve višegodišnje leguminoze prikažu koji su parametri efikasnosti mašina za doradu. Prikazani su svi relevantni parametri koji definišu karakteristike mašina za doradu semena, a to su: čisto seme (%), seme korova i seme drugih kultura (%), inertne materije (%), količina dorađenog semena (kg), gubici semena (%) i randman dorade (%).Dobijeni rezultati omogućavaju izbor odgovarajućih mašina i njihovo pravilno podešavanje pri doradi semena, u zavisnosti od količine i vrste korova i ostalih primesa koje se nalaze u naturalnom semenu.",
publisher = "Univerzitet u Beogradu Poljoprivredni fakultet Institut za poljoprivrednu tehniku",
journal = "Poljoprivredna tehnika",
title = "2019 Parameteres of efficiency of machines for seed processing of red clover and alfalfa",
pages = "18-10",
number = "1",
volume = "44",
doi = "10.5937/poljteh1901010d, 0554-5587"
}

Đokić, D., Stanisavljević, R., Terzić, D., Milenković, J., Kozlov, V., Koprivica, R.,& Vuković, A.. (2019). 2019 Parameteres of efficiency of machines for seed processing of red clover and alfalfa. in Poljoprivredna tehnika
Univerzitet u Beogradu Poljoprivredni fakultet Institut za poljoprivrednu tehniku., 44(1), 10-18.
https://doi.org/10.5937/poljteh1901010d

Đokić D, Stanisavljević R, Terzić D, Milenković J, Kozlov V, Koprivica R, Vuković A. 2019 Parameteres of efficiency of machines for seed processing of red clover and alfalfa. in Poljoprivredna tehnika. 2019;44(1):10-18.
doi:10.5937/poljteh1901010d .

Đokić, Dragoslav, Stanisavljević, Rade, Terzić, Dragan, Milenković, Jasmina, Kozlov, Vjačeslav, Koprivica, Ranko, Vuković, Aleksandar, "2019 Parameteres of efficiency of machines for seed processing of red clover and alfalfa" in Poljoprivredna tehnika, 44, no. 1 (2019):10-18,
https://doi.org/10.5937/poljteh1901010d . .

TY  - JOUR
AU  - Beković, Dragoljub
AU  - Biberdžić, Milan
AU  - Stanisavljević, Rade
AU  - Stojković, Slaviša
AU  - Vuković, Aleksandar
PY  - 2016
UR  - https://plantarum.izbis.bg.ac.rs/handle/123456789/1018
AB  - In order to determine the influence row spacing has on yield, yield components and the quality of alfalfa in agro-ecological conditions of south Serbia, a three year long research has been conducted, testing the NS Novosadjanka H-11 cultivar of alfalfa. The average seed yield of alfalfa was highest at a row spacing of 40 cm (311.03 kg ha-1), followed by row spacings of 20 cm (286.48 kg ha-1) and 60 cm (264.83 kg ha-1). The highest and lowest number of inflorescences per stem were obtained in rows spaced 60 cm (14.39 inflorescences/stem) and 20 cm apart (9.94 inflorescences/stem), respectively. The widest row spacing of 60 cm (8.14 pods/inflorescence) resulted in the highest number of pods per inflorescence, whereas the lowest number was produced at 20 cm spacing (5.96 pods/inflorescence). Grain number per pod ranged from 3.64 (at 20 cm row spacing) to 4.18 (at 60 cm). The highest quality of alfalfa seed during the three years of research was obtained at the widest row spacing (60 cm). Thousand-seed weight was highest at 60 cm and lowest at 20 cm (2.05 g and 1.99 g, respectively). The highest average values for seed germination rate were reported for 60 cm row spacing (86.92%) and the lowest for 20 cm row spacing (83.83 %).
PB  - INNSPUB
T2  - International Journal of Agronomy and Agricultural Research
T1  - The influence of row spacing on seed yield, yield components and seed quality of alfalfa
EP  - 92
IS  - 4
SP  - 87
VL  - 8
ER  - 

@article{
author = "Beković, Dragoljub and Biberdžić, Milan and Stanisavljević, Rade and Stojković, Slaviša and Vuković, Aleksandar",
year = "2016",
abstract = "In order to determine the influence row spacing has on yield, yield components and the quality of alfalfa in agro-ecological conditions of south Serbia, a three year long research has been conducted, testing the NS Novosadjanka H-11 cultivar of alfalfa. The average seed yield of alfalfa was highest at a row spacing of 40 cm (311.03 kg ha-1), followed by row spacings of 20 cm (286.48 kg ha-1) and 60 cm (264.83 kg ha-1). The highest and lowest number of inflorescences per stem were obtained in rows spaced 60 cm (14.39 inflorescences/stem) and 20 cm apart (9.94 inflorescences/stem), respectively. The widest row spacing of 60 cm (8.14 pods/inflorescence) resulted in the highest number of pods per inflorescence, whereas the lowest number was produced at 20 cm spacing (5.96 pods/inflorescence). Grain number per pod ranged from 3.64 (at 20 cm row spacing) to 4.18 (at 60 cm). The highest quality of alfalfa seed during the three years of research was obtained at the widest row spacing (60 cm). Thousand-seed weight was highest at 60 cm and lowest at 20 cm (2.05 g and 1.99 g, respectively). The highest average values for seed germination rate were reported for 60 cm row spacing (86.92%) and the lowest for 20 cm row spacing (83.83 %).",
publisher = "INNSPUB",
journal = "International Journal of Agronomy and Agricultural Research",
title = "The influence of row spacing on seed yield, yield components and seed quality of alfalfa",
pages = "92-87",
number = "4",
volume = "8"
}

Beković, D., Biberdžić, M., Stanisavljević, R., Stojković, S.,& Vuković, A.. (2016). The influence of row spacing on seed yield, yield components and seed quality of alfalfa. in International Journal of Agronomy and Agricultural Research
INNSPUB., 8(4), 87-92.

Beković D, Biberdžić M, Stanisavljević R, Stojković S, Vuković A. The influence of row spacing on seed yield, yield components and seed quality of alfalfa. in International Journal of Agronomy and Agricultural Research. 2016;8(4):87-92..

Beković, Dragoljub, Biberdžić, Milan, Stanisavljević, Rade, Stojković, Slaviša, Vuković, Aleksandar, "The influence of row spacing on seed yield, yield components and seed quality of alfalfa" in International Journal of Agronomy and Agricultural Research, 8, no. 4 (2016):87-92.